Programmable Cold and Heat Shock Tester (Three Tank Type) CTS Series is designed for testing the material structure or composite materials, in the instant after the extremely high temperature and extremely low temperature under the continuous degree of tolerance, in order to test in the shortest possible time due to thermal expansion and contraction of the chemical changes caused by or physical damage. To be tested completely static test mode is the current electronic parts testing, research, and semiconductor production line with a large number of screening, can save a lot of consumables testing costs. Fast operation and high reliability. Suitable for metal, plastic, rubber, electronics, aerospace, etc. Rubber, electronics, aerospace .... Material testing.

Rainfall Test Chamber LX-500 is designed for all electronic products, instruments and meters shell and seals in the rain environment can ensure that the products and components of good performance test. Box inside and outside are made of stainless steel, equipped with observation window, the box placed in the sample with the turntable, using frequency conversion speed motor speed control, pendulum swing 90 °, 180, 270 ° adjustable. According to GB4706, GB4208 13.2.3, GB2423 and other standards, to meet the IPX waterproof grade standard test requirements of IPX3-drenching test, IPX4-splash test.

Hydrolysis Resistance Tester RS-8230 is designed for testing the condition of dark-colored rubber soles and the hydrolysis resistance of upper materials, and is suitable for small-sized materials.

Test standard
GB-2423.1-89 (IEC68-2-1) Test A: Low temperature test method.
GB-2423.2-89 (IEC68-2-2) Test B: High temperature test method.
GB2423.3-93 (IEC68-2-3) Test Ca: Constant damp heat test method.
GJB150.9-93 (MIL-STD-810D) Test Method for Damp Heat.

Temperature and Climate and Low Air Pressure Test Chambers GDJZ-535L-B Designed for aviation, aerospace, communications, information, electronics, electrical appliances and other fields to determine the instrumentation, electrical products, equipment, etc. in the low air pressure, high temperature and low temperature single or simultaneous role of the extreme environmental adaptability and reliability test.

Programmable Constant Temperature and Humidity Chamber 408L is designed for all kinds of electrical and electronic, automotive, metal, plastic, chemical, aerospace, medical, building materials and other products and other products, parts and materials for high and low temperature constant and gradual change, hot and humid test and other environmental simulation reliability test.

Programmable Constant Humidity and temperature test chamber is designed for all kinds of electrical and electronic, automotive, metal, plastic, chemical, aerospace, medical, building materials and other products and other products, parts and materials for high and low temperature constant and gradual change, hot and humid test and other environmental simulation reliability test.

Sand and Dust Chamber SC-500 is designed for all electronic products, electrical appliances and electromechanical equipment to do the shell dust test, to assess the resistance of these products exposed to dry sand or dust-filled atmosphere and whether they can be stored and operated. Equipped with a large area of tempered glass observation window, easy to observe the sand and dust test status, digital display intelligent controller: can be set to blow dust, vacuum, heating, vibration time, set the test time, etc., automatic cycle; inside and outside are made of stainless steel plate.

High Temperature Test Chamber (Oven/Drying Chamber) DHG Series is designed for high temperature aging test of various materials.

Test standard
GB-2423.2-89 (IEC68-2-2) Test B: High temperature test method.
GJB360.8-87 (MIL-STD-202F) High temperature life test.
GBJ150.3 (MIL-STD-810D) High temperature test method.