This machine is equipped with 6 sets of clamps to test the folding strength of wires, plug leads and wires for mobile phone/communication industry accessories. The test method is to fix the sample on the clamp and add a certain load. During the test, the clamp swings left and right. After a certain number of times, check the disconnection rate; or when the power cannot be supplied, check the total number of swings. This machine can automatically count. When the sample is bent to the point where the wire is disconnected and the power cannot be supplied, it can automatically stop the operation and alarm.
This equipment is designed for testing the friction coefficient of glass, plastic film, paper, metal and other products. The purpose is to drive the sample to one side of the platform through the transmission mechanism, apply a slider to the surface of the sample, and then measure the static friction coefficient and dynamic friction coefficient of the sample and the slider through the force measurement system to obtain the friction coefficient of different batches of products. By measuring the smoothness of the material, the production quality process index can be controlled and adjusted to meet the requirements of product use.
This machine is suitable for adhesive tape, rubber, plastic, sponge, waterproof materials, electric wire & cable & thread, textile, net rope, non-woven fabrics ect nonmetal materials and metallic thread, metal foil, steel plate and metal rod to do stretching, compression, bending, peeling, cutting, tearing tests.
The dynamic fatigue testing machine is primarily used for testing the dynamic and static mechanical properties of various metallic materials, non-metallic materials, components, elastomers, rubber elasticity and dampers, composite materials, and lithium battery core poles. It can perform tensile, compression, bending, low-cycle and high-cycle fatigue, crack propagation, and fracture mechanics tests under sine wave, triangle wave, square wave, trapezoidal wave, ramp wave, sawtooth wave, and user-defined conditions.
This machine is suitable for abrupt pull test on power wire and headphone cable of mobile phone, e-book, tablet PC, electronic dictionaries, laptop and headset, etc..
purpose:
It is suitable for high and low temperature testing of batteries, batteries, electronic products and other products, parts and various materials. The equipment can simulate the quality inspection and reliability testing of products, parts and materials under the condition of temperature change
Purpose:
This machine is suitable for mobile phone, tablet computer, electronic dictionary, e-book, charger, car door lock, rotating shaft and other products to do torque test
product use:
This machine is suitable for various connectors for insertion force and pull out force test, equipped with automatic centering device with a variety of connector special fixtures, can get completely accurate insertion and pulling force results
Purpose:
It is suitable for testing the winding or torsion of various wire and wire products, and is used for testing the material properties and fatigue strength of wire.
