Cable Testing Machines
This machine is equipped with 6 sets of clamps to test the folding strength of wires, plug leads and wires for mobile phone/communication industry accessories. The test method is to fix the sample on the clamp and add a certain load. During the test, the clamp swings left and right. After a certain number of times, check the disconnection rate; or when the power cannot be supplied, check the total number of swings. This machine can automatically count. When the sample is bent to the point where the wire is disconnected and the power cannot be supplied, it can automatically stop the operation and alarm.
This machine is suitable for abrupt pull test on power wire and headphone cable of mobile phone, e-book, tablet PC, electronic dictionaries, laptop and headset, etc..
Purpose:
It is suitable for testing the winding or torsion of various wire and wire products, and is used for testing the material properties and fatigue strength of wire.
Purpose:
It is suitable for bending test of earphone cable, USB cable, multi-core cable, communication cable,flat cable and signal cable.
The test method is as follows:one end of the wire rod is short is short clamped, fixed on the rotating disc, and rotated left and left and right under a certain lifting load, so as to evaluate whether the wire rod has good conduction after N times of testing.
Test Standard:
EIA-364-41D cable flexing test procedure for electrical connectors.
It is suitable for bending resistance test on headphone cable.USB cable,multicore cable conductor,flat cable and signal line,etc.The test method is as follows:Firstly,clamp one end of the wire rod and fasten it to the rotation clamp. Then have it make a horizontal rotaion with hanging load to evaluate whether wire rod conduction is good after numerous test cycles.
The machine is applicable for various connectors cable to be as tests between of various keep force tests or destructive tests, which is able to get completely accurate results of insertion forces. The local machine adopts windows procedure setting, which is easy and simple to handle, can store the testing data automatically(loading-routes curve, and the test results), and besides, all the test conditions can be stored. It adopts load cell measurement of high precision and servo motor drives, so it is able to get precise tension force results. In fact, it is a kind of necessary detecting instrument for connector and cable manufacturer and various finished products manufacturers to develop and check products.
Purpose: This machine is suitable for 45-degree rotation life test of power cords, headphone cords, and new data cables of mobile phones, e-books, tablet computers, electronic dictionaries, laptops, headband headphones, etc.
Typical applications: Suitable for headphone cables, USB cables, multi-core cables, communication cables, flat cables, and signal cables for bending resistance tests. The test method is: the motor is installed vertically, one end of the cable is clamped on the motor rotating fixture, and the other end is hung with a weight (load) to rotate left and right to evaluate whether the cable is conductive after N tests.
