The Servo Control Automatic Tester RS-6600A is designed for various connectors for insertion force and pull out force test, equipped with automatic centering device with a variety of connector special fixtures, can get completely accurate insertion and pulling force results
RS-6600A Auto Insert & Extract Tester
Model: RS-6600A
Purpose:
The RS-6600A Auto Insert & Extract Tester is a high-precision testing device designed for various connectors. It accurately measures insertion and withdrawal forces and is suitable for tests such as pulling, pressure, and life tests. The device is equipped with an automatic centering system and specialized clamps, ensuring precise and reliable test results. It uses a Windows-based software interface, which simplifies operation and allows for automatic storage of test data (such as loading vs. displacement curves, loading attenuation life curves, and test results). All test conditions can be stored, making the machine easy to operate.
Fully Automatic Testing Mode
Simply input and store the test conditions for each test batch, and the machine will automatically conduct compression, tensile, and other tests. This high level of automation reduces operator workload and enhances testing efficiency.
Wide Applicability
With the use of different clamps, the RS-6600A can test various connectors and other products. It is suitable for R&D, IQC finished product testing, as well as service life and dynamic impedance tests. The device automatically stores all test data and curves upon completion.
High Precision
The machine uses a high-precision load cell. The load resolution is 0.01gf, and the displacement resolution is 0.001mm, ensuring highly accurate and reliable test results.
Flexible Unit Conversion
The load units can be freely converted between N, gf, kgf, and Lb; displacement units can be switched between mm and cm to meet different user preferences.
Multilingual Support
The RS-6600A is equipped with English, Simplified Chinese, and Traditional Chinese interfaces, making it easy to use for global customers.
Large Memory Capacity
All test data, including curves and raw data, are automatically stored on the computer's hard disk, with no limit on the number of records. All data can be accessed and retrieved at any time.
User-Friendly Design
All test parameters such as loading, displacement, cycles, speed, and waiting time are easily set via the computer interface. The system is intuitive and simple to use.
Automated Report Generation
Test results are automatically formatted into reports, including data and curve reports. The report titles can be modified (both in English and Chinese) as needed, and no additional data entry is required. Reports can be printed at any time.
Automatic Judgment and Test Result Analysis
The system allows users to input the upper and lower limits for compression and tensile loads. It will automatically judge the test results (Passed or Failed) and provide detailed analysis, ensuring the accuracy and reliability of the test results.
Scroll-Type Graph Display
The device automatically generates tensile and compression curves, with insertion represented by positive values and withdrawal by negative values, allowing users to easily interpret the test data.
The RS-6600A Auto Insert & Extract Tester is the ideal choice for accurate and efficient connector force testing. With its high precision, automation, and powerful data management features, it will greatly enhance your testing capabilities and product development processes. Choose the RS-6600A today to boost your productivity and testing efficiency!
Device appearance:
Software tests:
|
MDEOL |
RS-6600A |
|
Capacity(optional) |
5kgf,10kgf,20kgf,50kgf,100kgf |
|
Unit(Switchable) |
kgf, N, Lb, gf |
|
Load Accuracy |
±0.2% |
|
Load Least Display |
0.01kgf or 0.01gf |
|
T est Stroke |
0~150mm |
|
Stroke Least Display |
0.001mm |
|
Effective Width |
290mm |
|
Test speed |
0~500mm/min |
|
peed Accuracy |
±0.5% |
|
Motor |
The Japanese Panasonic servomotor |
|
Main Unit Dimension(WxDxH) |
460x270x950mm |
|
Main Unit Weight |
70kg |
|
Power |
AC220 5A Or is specified |
|
Emergency stop time |
100ms |
The Connector Insert and Extract Life Testing Machine RS-8115A-5L is designed for conducting insertion and extraction life tests on various connectors used in consumer electronics such as mobile phones, tablets, e-books, electronic dictionaries, and more. These connectors include charging adapters, charging cables, headphone cables, data cables, and other types of connectors.
Mainly used to be able to flex the circuit board [commonly known as software circuit boards] for the flex test; such as cell phones, PDA, electronic dictionaries, laptop computers and other electronic products FPC flexible boards of the resistance to flexing,flexing life detection test.
Designed for various capacitive and infrared touch screen modules ( mobile phones, tablets, e-books, electronic dictionaries, etc.) and is capable of conducting click and scratch tests.For precision testing, jitter testing, linearity testing, sensitivity testing, long-duration scratch testing, and long-duration click testing of capacitive screens.
The Spindle Torque Endurance Testing Machine rs-6700(servo type) is designed for LCD MONITOR liquid crystal display, V liquid crystal TV, all-in-one computer, etc. After many times of forward tilt and backward swing test, whether the rotor shaft still has the holding force or the rotor shaft resistance becomes large and damages the plastic body.
The Folding Screen Cell Phone Life Testing Machine is designed for folded cell phone testing requirements, to meet the four or six W200 * L250mm (max) size foldable cell phone folding life test.
Designed for notebook computers, tablet PCs, e-books, computer keyboards, etc., long side, short side of the whole machine to do twisting test, but also for a variety of spindles HINGE for torque (torque attenuation), life test, can be measured each time the torque value of the forward and reverse rotation, and through the USB2.0 communication module will be captured by the torque signal to the PC, by the PC to automatically record the curve of its curve changes and draw the torque attenuation life curve graph, the Windows® window screen to set the test conditions, easy to operate and all data can be stored (test conditions, torque-angle curve graph, life curve graph, test data report...) Using Windows® window screen to set up the test conditions, the operation is simple and convenient, and all the data can be stored (test conditions, torque-angle curve, life curve, test data report, etc.), which is a powerful tool for HINGE manufacturers to improve the quality of their products.
Designed to test the coefficient of friction of glass, plastic film, paper, metal and other products, the purpose is to drive the sample through the transmission mechanism to move to one side of the platform, the sample surface exerts the slider, and then through the measurement system will be the sample and the slider static coefficient of friction, coefficient of friction, in order to get the results of the coefficient of friction of the products of different batches. Through the measurement of the material's slipperiness, it can control and regulate the production quality and process indexes of the products to meet the requirements of product use.
The Automated torque tester is designed for cell phone,. Tablet PC, electronic dictionary, e-book, charger, car door locks, spindles and other products to do torsion test: Adopts Windows Chinese and English program settings, easy to operate, automatic storage of test data (torque - angle curve, torque decay life curve, test results), and the test conditions can be stored. Adopts imported high-precision load element measurement and servo motor drive, can get the accurate results of the pull Wan, really for the customer day wide business R & D, quality control lack of essential testing equipment.
Contact information
No. 32 Qiaoxin East Road, QiaotouTown, Dongguan City,Guangdong Province,China
Contact
