RS-8105D-45° Conical Tester
The RS-8105D-45° Conical Tester is designed for endurance testing of cables in industries such as mobile phones, tablets, laptops, and electronic devices. With its advanced features, it ensures accurate, reliable performance in a compact and space-saving design.
Key Features:
- Space-Saving Double-Station Design: The machine uses two independent testing stations, maximizing the use of available space while maintaining high efficiency.
- Transparent Safety Cover: A clear protective cover enhances safety without sacrificing visibility, allowing operators to easily observe the testing process.
- Precise Testing Control: Equipped with a Japanese OMRON® touch screen for intuitive control, allowing users to input and display test conditions and cycle counts in real-time. The Japanese MITSUBISHI® PLC ensures consistent program control.
- Advanced Mechanical System: The machine features a Panasonic® AC servo motor, SHIMPO® planetary gear system, and Mitsubishi® synchronous belt drive, ensuring precise angle control (±1°), low noise, and long-lasting durability.
- High-Precision Testing: The RS-8105D-45° is designed to perform accurate rotation tests up to ±720° with adjustable speeds from 30 to 60 rpm. The machine can simulate the real-world usage of cables in devices like phones and laptops.
System Performance:
| Model |
RS-8105D-45° |
| Testing Slots |
2 (Up and Down) |
| Radius of Gyration |
280mm |
| Test Speed |
30-60 rpm (commonly 42 rpm) |
| Test Angle |
0~±720° |
| Test Load |
Up to 500g (based on customer requirements) |
| Machine Dimensions |
W1030 × D650 × H1500mm |
| Machine Weight |
155kg |
| Power |
1∮ AC220V 5A |
Purpose and Application:
The RS-8105D-45° Conical Tester is specifically designed for cable life testing. It is ideal for testing power cables, headphone cables, and other similar flexible cables used in consumer electronics such as mobile phones, e-books, tablets, and laptops. The machine simulates the stresses these cables endure through a 45° rotation, ensuring they meet durability standards.
Test Method:
- Cable Setup: Secure one end of the cable or headphone wire in the fixture. Fold the cable 80–100mm from the gripping end, loop it into the rotatable buckle, and connect the reference line. The reference line runs through two flexible pulleys and attaches to a weight.
- Test Procedure: Set the speed to 42 rpm and the angle to ±720°. A full cycle consists of rotating the cable 720° in one direction and then back to 720° in the opposite direction. The test continues until 5800 cycles are completed, after which the cable is inspected for any damage.
- Online Conduction Test: If desired, a conduction test can be performed by soldering wires to both ends of the cable. The machine will automatically stop if there is a disconnection or conduction failure.
