Model:RS-8000-200KN
The machine is suitable for metal bar, metal foil, sheet metal and rubber, plastic, tape, sponge/foam, waterproof materials, wire and cable, textiles, net twine, non-woven materials on tests such as tensile, compression, bending, peel, cut, tear, bursting, puncture, and fatigue etc. It is helpful to improve the quality of the industry. The machine adopts force value, displacement, speed three-closed-loop control system, it can be fixed for force value, fixed position, fixed speed, fixed stress, fixed strain, fixed cycle number of tests, to meet the material low cycle fatigue test.
Specification:
Capacity(Optional) |
200KN(20T) |
Unit(Switchable) |
N,KN,Kgf,Lbf |
Power system |
Japan Panasonic servo motor + Italy Motorway reducer + Japan Mitsubishi synchronous belt + Taiwan ABBA ball screw drive |
Sensor accuracy |
±0.01%FS |
Force resolution |
1/500,000 |
Precision grade |
±0.5% |
Accuracy of measurement |
±0.5%F.S |
Effective measuring range |
0.2%~100%F.S |
Displacement resolution |
0.0001mm |
Accuracy of displacement measurement |
Within±0.5% of the indicated value |
Deformation resolution |
0.0001mm |
Accuracy of deformation measurement |
Within ±0.5% of the indicated value |
Effective stretch space |
800mm (without fixture) |
Effective measurde width |
600mm |
Test speed range |
0.001~350mm/min |
Test speed accuracy |
When the speed is lower than 0.01mm/min, within ± 1% of the set value.
When the speed is ≥0.01mm/min, within ± 0.5% of the set value. |
Deformation measurement (optional) |
Large deformation: 10~1000mm.
small deformation: standard distance 25mm, deformation 25mm.
|
Accuracy of deformation measurement |
Less than 0.5% of the indicated value |
Test deformation parameter |
Rate≥0.05% FS/S, Within±0.5% set value |
Constant force,constant deformation and constant displacement parameters |
Constant force,constant deformation,constant displacement control range:5%-100%FS
Constan force,constant deformation and constant displacement control precision:
A.when the rate is ≥10%FS,within ±0.1% of the set value;
B.The rate is less than 10%FS,within ±1% of the set value.
|
Jig |
Tension,compression,three point bending |
Test bench safety device |
Mechanical limit |
Test platform lifting device |
Fast/slow,two kinds of speed automatic control,can point control |
Bench return function |
Manual or automatic return,automatic break return |
Overload protection |
Over 10% of the maximum load, the machine is automatically protected |
Host size |
W1200xD720xH2200mm |
Host weight |
(about) 1250kg |
Power supply |
AC 220V 20A |
Noise |
5mm/min 55dB(A), 500mm/min 70dB(A) |
Standards:
This testing machine is based on "Electronic Universal Testing Machine" GB/T16491-2008, "Testing Machine General Technical Requirements" GB2611-2007, "Tensile Testing Machine Force Measuring System Detection", "Extension Meter Technical Conditions" JB6146-2007, "Manufacturing Measuring Instruments Permit Assessment General Specification" JJF1246-2010 standards for manufacturing.
It meets the test requirements of GB/T228-2002, GB/T14452-93 and other standards of Tensile Test Method of Metal Materials at Room Temperature.
It meets the "Test Method for Tensile Strength of Plastic" ASTM D638-03 and "Test Method for Bending Strength of Plastic" ASTM D790-07.
GB/T2792、ASTM D3330-04 Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape (Test Method A—Single-Coated Tapes at 180° Angle).
ASTM D1894-06 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting (Single Coated Tapes at 90° Angle).
●Metal Bar/Sheet Tensile Testing.
●Rubber/Plastic Tensile Testing.
●Plastic Three-point Flexural TestingTape 900/1800 Peel Strength Test.
●Fabric Tear Test.
●Beverage Packaging Compression/Bursting Force Test.
●Metal/Plastic Bending Test.
●Environmental Protection Splint Bonding Test.
●Composite Woven Packing Tape Strength Test.
●High precision:
Adopts Japan Panasonic AC servo motor drive, Taiwan ABBA high-precision no-backlash ball screw drive, with the (United States) Transcell high-precision explosion-proof LOADCELL, force accuracy up to ±0.25%, displacement resolution up to 0.0001mm.
●High intelligence:
Automatic recognition of fracture, automatic return, curve traversal function, free switching units, a variety of languages can be switched: simple/traditional Chinese, English...Load - displacement, load - time, displacement – time, stress - strain, strain - time, stress - time curve analysis.