Model:RS-8000-5

The machine is applicable for various connectors cable to be as tests between of various keep force tests or destructive tests, which is able to get completely accurate results of insertion forces. The local machine adopts windows procedure setting, which is easy and simple to handle, can store the testing data automatically(loading-routes curve, and the test results), and besides, all the test conditions can be stored. It adopts load cell measurement of high precision and servo motor drives, so it is able to get precise tension force results. In fact, it is a kind of necessary detecting instrument for connector and cable manufacturer and various finished products manufacturers to develop and check products.

Specification

Features

●Full-automatic test mode

Tester only need to input and store the test condition of that test piece (a batch) and then can achieve automatic tensile tests.

●High precision

Loads resolution: 0.01gf, displacement resolution: 0.001mm.

●Unit conversion

Loading: N, gf, kgf and Lb can be freely converted; displacement: mm and cm can be freely converted.

●Language switch

Equipped with English, traditional Chinese and simplified Chinese, which can be freely inter-translated, with stronger applicability.

●Large memory space

Test data(curves and data) is stored in the hard disk of the computers(each data can be stored with unlimited numbers).

●Humanization design, easy and simple to handle

All the test conditions are set up by computer pictures: testing loading, displacement, number, speeds and waiting time...

●Humanization report design

Contents of report title can be modified at any time(both English and Chinese are applicable), and reports shall be generated automatically, without need to re-input. Data reports and curve reports can printed.

●Automatically decide and analyze tests results

The upper limits and lower limits of the tensile loading can be inputted, and automatically decide and analyze the test results, namely passed or failed, and so on.

●The tensile tests can be conducted in five groups independent.

5 Slot, independent control, independent test, which can ensure that each station of calbes can conduct tensile tests independent.