Model:RS-6600C-5
The machine is applicable for various connectors to be as tests between insertion force and withdrawal force, and configure automatic O-heart device and special clamps of various connectors, which is able to get completely accurate results of insertion forces. The local machine adopts windows procedure setting, which is easy and simple to handle, can store the testing data automatically (loading-routes curve, loading attenuation curve of life and the test results), and besides,all the test conditions can be stored. It adopts load cell measurement of high precision and servo motor drives, so it is able to get precise insertion force results. In fact, it is a kind of necessary detecting instrument for connector manufacturer and various finished products manufacturers to develop and check products.
●Whole row plug tests of connectors.
●Connectors plug service life tests.
●Connector normal force tests.
●Various tension tests and pressure tests.
●Single-hole plug tests of connectors.
●Connector PIN and plastic retention force tests.
●Connector's shrapnel compression tests.
●Independent insertion and pulling-out tests of the connectors in group-5.
●Full-automatic test mode
Testers only need to input and store the test condition of that test piece (a batch) and then can achieve automatic compression tests and tensile tests.
●Wide applicability
Coordinated with different clamps, conduct various connectors, etc, products tests, which not only can be as compression tests and tensile tests of connectors, etc, R&D, IQC finished products, but also as service life and dynamic impedance tests. And after completing tests, automatically store test curves and data.
●High precision
Loads resolution: 0.01gf, displacement resolution: 0.001mm.
●Unit conversion
Loading: N, gf, kgf, and Lb can be freely converted; displacement: mm and cm can be freely converted.
●Language switch
Equipped with English, traditional Chinese and simplified Chinese, which can be freely inter-translated, with stronger applicability.
●Large memory space
Test data (curves and data) is stored in the hard disk of the computers (each data can be stored with unlimited numbers).
●Humanization design, easy and simple to handle
All the test conditons are set up by computer pictures: testing loading, displacement, numbers, speeds and waiting time...
●Humanization report design
Contents of report title can be modified at any time (both English and Chinese are applicable), and reports shall be generated automatically, without need to re-input, Data reports and curve reports can be printed.
●Automatically decide and analyze tests results
The upper limits and lower limits of the compression and tensile loading can be inputted, and automatically decide and analyze the test results, namely passed or failed, and so on.