Model:RS-8010-XY
This UTM are suitable for the testing of tensile,compression,shearing force,adhesion,peeling force,tear strength etc for semiproduct&finished product in the field of rubber,plastic,metal,nylon,fabric,paper,aviation,packing,architecture,petrochemistry,electric appliance,automobile,etc,which are the basic facilities for input quality control(I.Q.C),Quality Control(Q.C),Physical inspection,Mechanics research and material development.
Standard
GB/T228-2002,GB/T14452-93,ASTM D638-03,ASTM D790-07,GB/T292,ASTM D3330-04,ASTM D1894-06.
Specification
Capacity(optional) |
100N,200N,500N,1KN,2KN |
Unit(switchable) |
N,KN,Kgf,Lbf |
Dynamic system |
PanasonicRAC servo motor+ShimpoRgear reducer+MitsubishiRsynchronous belt+TBIRBall screw |
Load cell accuracy |
±0.01%F.S |
Load resolution |
1/500,000 |
Level of the accuracy |
±0.5% |
Measurement accuracy |
±0.5%F.S |
Effective range |
0.2%~100%F.S |
Stroke resolution |
0.0001mm |
Stroke measurement accuracy |
Less than ±0.5% of the display |
Deformation resolution |
0.0001mm |
Deromation measurement accuracy |
Less than±0.5% of the display |
Stroke (exclude the grips) |
1000mm |
Effective width |
400mm |
Test speed |
0.001-500mm/min |
Speed accuracy |
±0.5% |
Deformation measurement (purchasing additional) |
Large deformation:10-1000mm, Electronic extensometer:gauge length-25mm,deformation 25mm |
Fixtrue |
Tensile,compression,peeing force |
X-Y axis mobile test platform |
X axis:0-350mm |
Limiting Protection |
Mechanical limit |
Overload Protection |
Over maximum load 10%,machine protection |
Main unit dimension(WxDxH) |
W800*D1080*H1720mm |
Main unit weight |
175kg |
Power |
AC220V 5A |
Noise |
5mm/min 55db(A)/500mm/min 68db(A) |
Software
1.Tensile Test graph

2.Compression test graph

3.Peeling test graph.

Testing report

High accuracy
Adopt AC servo motor to driving the high precise ball screw working,with high precise explosion-proof load cell,load accuracy reached to ±0.25% & displacement accuracy reach to 0.001mm.

High performance
Automaic broken identification,automatically retum,point collected by hand,multi-units switching.
Superior software program
Can achieve the closed loop control in force value,speed & displacement,so can satisfy the fatigue test of rubber and durable test of other material in the condition of low cycle.Can record and memorize the whole testing data,And also have many kinds of analysis curve:stress vs strain curve,load vs flexure curve,strength vs deformation curve,strength vs time curve,time vs flexure curve.
Multi-function
Can coordinate with different grips,the tests of tensile,compression,bending,tearing,peeling,elongation rate etc can be done.
Manual Control Panel
