This machine is to test heat endurance, cold endurance, dry endurance, wet endurance of various materials. It applies for quality control of electronic goods, electric appliance, measurement device, food, automobile, metal, chemical, plywood, aviation, medical and etc.
| Model | GDJS-100L | GDJS-150L | GDJS-225L | GDJS-408L | GDJS-800L | GDJS-1000L |
|---|---|---|---|---|---|---|
| Temp.-range | A: -20℃~+150℃; B: -40℃~+150℃; C: -70℃~+150℃; | |||||
| Humidity range | 20% RH ~ 98% RH | |||||
| Temp.-accuracy | ±0.5 ℃ | |||||
| Humidity accuracy | ±3% RH | |||||
| Temp.-uniformity | ±5 ℃ | |||||
| Time for heating up | 35 min for +20℃ ~ +100 ℃；45 min for -40℃ ~ +100 ℃； | |||||
| 60 min for -70℃ ~ +100 ℃； | ||||||
| Time for cooling down | 40 min for +20℃ ~ -20℃; 55 min for +20℃ ~ -40℃; | |||||
| 90 min for +20℃ ~ -70℃; | ||||||
| Interior Dim. | 400*500*500 | 500*600*500 | 500*750*600 | 600*850*800 | 1000*1000*800 | 1000*1000*1000 |
| (W*H*D)mm | ||||||
| Exterior Dim. | 1000*1450*1050 | 1000*1500*1100 | 1000*1650*1200 | 1100*1750*1400 | 1500*1900*1400 | 1500*1900*1600 |
| (W*H*D)mm | ||||||
| Interior Material | Stainless steel SUS304 (Mirror) | |||||
| Exterior Material | Stainless steel SUS304 (Matte) | |||||
| Thermal insulation material | Rigid polyfoam (to use glass wool at 150℃) | |||||
| Cooling system | Hermetic compressor | |||||
| Accessories | Observation window, freely adjustable shaft for 2 layer, test hole for 1 pcs at ∅50mm, Chamber lamp | |||||
| Weight | 220 Kg | 250 Kg | 300 Kg | 400 Kg | 600 Kg | 700 Kg |
| Power | AC 220 V 3KW or specified | AC 220 V 4KW or specified | AC 380 V 5.5KW or specified | AC 380 V 7.5KW or specified | AC 380 V 10KW or specified | AC 380 V 11KW or specified |
High and low temperature test chamber applying to electrical engineering, electronic products, components and the adaptive test of materials during storage, transportation and use in high and low temperature.
In addition to testing the adaptability and the characteristics of the product had been changed under the general conditions of temperature and humidity combination (High-low temperature & storage, temperature cycling, high temperature and high humidity or moisture condensation test) by simulatable products, low humidity and constant temperature-humidity test chamber can also test whether the crazing and breakage of the product would happen under the conditions of low temperature and low humidity, high temperature and low humidity, high temperature and high humidity, low temperature and high humidity. Further more, the static content in air under the low humidity condition is many time more than the general condition, and it is said that most damage of the electronic components is caused by static.
Meeting the requirements of international specification test (IEC, JIS. JB, MIL...) to ensure the consistency of international measurement programs (including testing procedures, conditions and methods) to avoid cognitive differences and reduces the measurement uncertainties.
This equipment is suitable for all kinds of electrical and electronic products and other products, parts and materials to carry out high and low temperature constant and gradual change, humidity and heat test and other environmental simulation reliability test.
other uses may cause injury to personnel and damage to equipment.
Testing and storage of samples of flam mable。
Product use: This equipment is suitable for high and low temperature humidity test of various electronic products, aging test of LED, PCB and other products. Special requirements can be customized, such as low temperature and low humidity test: 3C/10%RH; 2, 5C/10%RH, etc. The inner box size can be customized, the temperature and humidity range can be customized, and the test room floor load-bearing capacity: 600kg/m2 (uniform load) is made of fully welded stainless steel SUS304 anti-skid plate.
Contactin for mation
No. 32 Qiaoxin East Road, QiaotouTown, Dongguan City,GuangdongProvince,China
Contact
