The testing battery sample is placed on a flat surface with a 15.8 earth 0.2mm (5/8 inch) diameter bar placed crosswise over the center of the specimen. A 9.1kg or 10kg weight is dropped onto the sample from a certain height (610mm or 1000mm or 1500mm). Cylindrical or square cells are subjected to the impact test with their longitudinal axis parallel to the plane and perpendicular to the longitudinal axis of the steel column. The longest axis of the square cell is perpendicular to the sub-steel column, and the most heavenly surface is perpendicular to the direction of impact, and each cell is subjected to only one impact test.
Battery Puncture and Extrusion Tester RS-8000A2-50KN is designed for battery/power battery pack pinch & crush test to simulate the detection of local thermal runaway or internal short-circuit that may be triggered when the battery product is subjected to crush pressure or external object penetration, and real-time and synchronous collection of crush penetration force, crush penetration stroke, battery surface temperature, battery voltage change, etc. during the test process.
The Battery Spray Combustion Tester is designed for lithium battery (or battery pack) flame resistance test. In an experimental platform to drill a diameter of 102mm holes, and in the holes placed on a wire mesh, the battery under test on the wire mesh screen, installed around the specimen in an octagonal aluminum wire mesh, and then ignite the burner, the specimen burst into heat until the battery explodes or the battery burned down, and the combustion process is timed.
Test standard
UL2272-2016，UL2271-2013，GB/T31241-2014，GB/T 18287 -2013
GB/T8897.4-2008，YD/T 2344.1-2011，GB/T 31485-2015
The Battery explosion-proof test chamber is mainly designed for battery overcharging and discharging, charge and discharge test, the battery will be placed in the explosion-proof box, external charge and discharge tester, for the protection of the operator and the instrument,it can be customized according to the test requirements.
The High Temperature Aging Test Chamber is designed for high temperature aging test of electric core and module as well as electronic parts and various materials. The unique air duct design ensures higher temperature precision and uniformity. The circulating fan adopts frequency conversion control, low noise, and the size can accept customized.
Auto Steel Ball Impact Tester RS-8220V-XY is designed for steel ball impact test for glass cover or rubber case of cell phone, tablet PC, e-book, battery, electronic dictionary, and TP module of touch screen to evaluate the impact strength of the product.
Applicable standards:
GB/T 14485 Test Method for Impact Resistance of Engineering Plastics, Rigid Plastic Sheets and Plastic Parts Falling Ball Method
GB/T15763.2 Tempered glass-impact resistance test
GB/T13520 Rigid polyvinyl chloride extruded sheet-falling ball impact method
GB/T5226.1 General technical requirements for electrical safety of machinery
GB/T2611 General technical requirements for testing machines.
The RS-8220G is a high-precision impact testing device designed for evaluating the impact resistance of materials like plastic, ceramics, acrylic, and coatings. Key features include an OMRON NB5Q color touchscreen, Panasonic AC servo motor, infrared laser positioning, and anti-secondary impact design. It supports steel balls from 32.5g to 500g, with a drop height range of 200~1800mm. Compliant with JIS K5004 and TIA-968-A4, it ensures reliable, accurate testing for electronics manufacturers and laboratories.
Programmable Cold and Heat Shock Tester (Three Tank Type) CTS Series is designed for testing the material structure or composite materials, in the instant after the extremely high temperature and extremely low temperature under the continuous degree of tolerance, in order to test in the shortest possible time due to thermal expansion and contraction of the chemical changes caused by or physical damage. To be tested completely static test mode is the current electronic parts testing, research, and semiconductor production line with a large number of screening, can save a lot of consumables testing costs. Fast operation and high reliability. Suitable for metal, plastic, rubber, electronics, aerospace, etc. Rubber, electronics, aerospace .... Material testing.
Rainfall Test Chamber LX-500 is designed for all electronic products, instruments and meters shell and seals in the rain environment can ensure that the products and components of good performance test. Box inside and outside are made of stainless steel, equipped with observation window, the box placed in the sample with the turntable, using frequency conversion speed motor speed control, pendulum swing 90 °, 180, 270 ° adjustable. According to GB4706, GB4208 13.2.3, GB2423 and other standards, to meet the IPX waterproof grade standard test requirements of IPX3-drenching test, IPX4-splash test.
