Temperature Control Battery Short Circuit Tester RS-6003C-4 integrated a variety of battery short-circuit test standard requirements and design, according to the standard requirements of the short-circuit device must comply with the C resistance range ≤ 5mo, so as to obtain the maximum short-circuit current test requirements; In addition to the short-circuit device line design must be able to withstand the impact of high-current, so we chose to use the work of the sub-grade DC magnetic contactor and all-copper terminal and the C part of the copper plate current conduction, wide and thick copper board effectively improve the heat dissipation effect so that high-current short-circuit device safer, effectively reducing the loss of test equipment to ensure the accuracy of the test data. Wide and thick copper plate effectively improves the heat dissipation effect, making the high-current short-circuit device safer, effectively. 

Test standard
GB/T31485, IEC, EN, UN38.3, UL2054, QC/T744-2006, QC/T743-2006 and other standards.

High and low temperature battery explosion-proof test chamber ITM-DEP is designed for power batteries, electric cells, electronic products and other products, parts and components, a variety of materials for high temperature, low temperature test, the equipment can simulate temperature changes in the conditions of Bian on the product, parts and components, materials, such as slanting the quality inspection and reliability testing.

The testing battery sample is placed on a flat surface with a 15.8 earth 0.2mm (5/8 inch) diameter bar placed crosswise over the center of the specimen. A 9.1kg or 10kg weight is dropped onto the sample from a certain height (610mm or 1000mm or 1500mm). Cylindrical or square cells are subjected to the impact test with their longitudinal axis parallel to the plane and perpendicular to the longitudinal axis of the steel column. The longest axis of the square cell is perpendicular to the sub-steel column, and the most heavenly surface is perpendicular to the direction of impact, and each cell is subjected to only one impact test.

High and low temperature battery extrusion tester RS-6006A-GDW is designed for simulate the battery extrusion test in high and low temperature environment.

Test standard
GB 31241-2014,GB/T8897.4-2008,YD/T 2344.1-2011,GB/T 21966-2008,MT/T 1051-2007,YD 1268-2003,GB/T 19521.11-2005,YDB 032-2009,UL1642,UL 2054, IEC62281,IEC 60086 IEC62133 UN38.3 test standards. IEC62281,IEC 60086 IEC62133 UN38.3 and other test standards.

Battery Puncture and Extrusion Tester RS-8000A2-50KN is designed for battery/power battery pack pinch & crush test to simulate the detection of local thermal runaway or internal short-circuit that may be triggered when the battery product is subjected to crush pressure or external object penetration, and real-time and synchronous collection of crush penetration force, crush penetration stroke, battery surface temperature, battery voltage change, etc. during the test process.

The Battery Spray Combustion Tester is designed for lithium battery (or battery pack) flame resistance test. In an experimental platform to drill a diameter of 102mm holes, and in the holes placed on a wire mesh, the battery under test on the wire mesh screen, installed around the specimen in an octagonal aluminum wire mesh, and then ignite the burner, the specimen burst into heat until the battery explodes or the battery burned down, and the combustion process is timed.

Test standard
UL2272-2016，UL2271-2013，GB/T31241-2014，GB/T 18287 -2013
GB/T8897.4-2008，YD/T 2344.1-2011，GB/T 31485-2015

The Battery explosion-proof test chamber is mainly designed for battery overcharging and discharging, charge and discharge test, the battery will be placed in the explosion-proof box, external charge and discharge tester, for the protection of the operator and the instrument,it can be customized according to the test requirements.

The High Temperature Aging Test Chamber is designed for high temperature aging test of electric core and module as well as electronic parts and various materials. The unique air duct design ensures higher temperature precision and uniformity. The circulating fan adopts frequency conversion control, low noise, and the size can accept customized.