use:
It is used for extrusion & acupuncture test of battery and battery module in high and low temperature environment. It has video monitoring function and can automatically save video and reproduce the test process.
|
model |
RS-6006GDW |
|
Test capacity |
10 kN, 20 kN, 50 kN (optional) |
|
Equipment precision |
Level 0.5 |
|
Temperature box parameters |
Temperature range: -20℃ ~ + 85℃ (adjustable) Temperature fluctuation degree: ± 2.0℃ Temperature deviation: ± 2.0℃ Temperature uniformity: ± 2.0℃ Rise / cooling rate: 1℃ / min (no-load, nonlinear) |
|
External box material |
Cold-rolled steel plate, the thickness of 1.2MM, double-sided spraying treatment |
|
Internal box material |
Using SUS304 # stainless steel plate, the thickness is 1.0MM, the whole full welding treatment, to ensure the sealing performance of the inner box, the bottom of the strengthened design, the inner box can easily clean and dispose of the battery explosive decomposition |
|
camera |
External configuration of 800W HD camera, brand Hikvision |
|
safety function |
Explosion-proof, pressure relief, forced smoke exhaust |
|
Air supply mode |
External high temperature air inlet, exhaust outlet, with closed valve |
|
Force value range |
0.1~100%(capacity) |
|
Force value accuracy |
≤±0.5%FS |
|
Displacement range |
0~350mm |
|
Displacement resolution |
0.001mm |
|
Displacement accuracy |
≤±0.5% |
|
Spin test speed |
0.01-80 mm/s (continuously adjustable) |
|
Squeeze test speed |
0.01-30 mm/s (continuously adjustable) |
|
Speed resolution |
0.001mm/s |
|
Speed control accuracy |
≤±0.5% |
|
Squeeze fixtures |
A, circular extrusion head: diameter 200mm, thickness 20mm; B. Rectangular extrusion head: 200 * 400mm, 20mm thickness; C. Ball extrusion head: diameter 15 / 20 / 25 / 30mm, length 90mm; diameter 150 / 180mm, length 300mm; D, R-type extrusion head: radius R75mm, width 300mm, length 300mm; Material is made of 304 # stainless steel |
|
draw point |
ø 1, ø 3, ø 5, ø 6, ø 8mm, taper 30,45,60 tungsten steel needle |
|
Voltage collection channel |
A. Acquisition channel: 3 channels; B, Voltage acquisition range: 0~10V And c. Voltage resolution: 0.1 mV D, voltage accuracy: ± 0.069% |
|
Temperature collection channel |
A. Acquisition channel: 10 channel; B. Temperature acquisition range: 0~1000℃ C., Temperature resolution: 0.1℃ D, Temperature accuracy: ± 2℃ E, replaceable thermocouple, quick replacement |
|
Frequency of data acquisition |
1000Hz |
|
Test return speed |
1~80mm/s |
|
Downtime method |
Force value, deformation, voltage, temperature, temperature rise rate, can be arbitrarily combination |
|
safe guarding |
Mechanical limit, force value overload protection, emergency stop switch |
|
source |
AC380V 50Hz |
|
Emergency-stop response time Emergency stop time |
100ms |
purpose:
It is suitable for high and low temperature testing of batteries, batteries, electronic products and other products, parts and various materials. The equipment can simulate the quality inspection and reliability testing of products, parts and materials under the condition of temperature change
This Battery Test Equipment is used for the acupuncture/extrusion test of the battery/battery pack, simulates the detection of locat themal runaway of internal short circuit that may be caused by the extrusion force or foreign object penetration of the battery product.
A device that is installed into the battery module frame and can efficiently simulate the expansion force of the battery core. It can continuously output alternating loads or stable loads and quickly evaluate the fatigue strength of the module frame structure. For double-row battery modules, it supports dual motor linkage control (that is, placing 2 sets of test equipment in the frame to synchronously control the load of each equipment). The equipment is driven by a motor, and a load is applied to the profiling block through a reducer, transmission mechanism, etc. to simulate the cell expansion force.
Purpose:
It is used for extrusion and needling test of batteries and battery modules to simulate and detect local thermal runaway or internal short circuit that may be caused by extrusion pressure or external object puncture of battery products.
During the test process, extrusion pressure, extrusion stroke, puncture force, puncture stroke, battery surface temperature and battery voltage change curve are collected synchronously in real time. The extrusion pressure or puncture force that the product may withstand in actual use is simulated in the laboratory; It can meet the battery extrusion and puncture test requirements of monomers or small modules in various standards.
The power battery extrusion & acupuncture testing machine is used to simulate various types of power lithium batteries in the transportation, storage and use process, the battery is squeezed or needled, and the battery is artificially presented in the different conditions that may occur when the battery is squeezed by strong external forces or sharp needles.
The equipment in use, once the battery fire or explosion should be able to absolutely ensure personal safety and no harm to the test site.
Contactin for mation
No. 32 Qiaoxin East Road, QiaotouTown, Dongguan City,GuangdongProvince,China
Contact
