Battery Thermal Shock Tester | RS-6009C
Simulates battery exposure to controlled high-temperature environments with adjustable ramp rates, designed for battery thermal shock and safety testing.
| Function Description | Specification |
| Product Model | RS-6009C |
| Temperature Deviation | ±2.0°C (130°C/150°C) (no-load test) |
| Test Temperature | 130°C ±2.0°C (no-load test) |
| Display Accuracy | 0.1°C |
| Control Accuracy | ±0.5°C |
| Heating Rate | 5°C ±2.0/min, programmable time-controlled ramp rate |
| Temperature Range | Ambient +20~200°C adjustable |
| Control Output Signal | 3 – 32V |
| Inner Chamber Dimensions (mm) | 500 × 500 × 500 |
| Outer Chamber Dimensions (mm) | 770 × 720 × 1270 |
| Weight | 250kg |
| Power Supply | AC 220V 50Hz |
The RS-6009C Battery Thermal Shock Tester simulates batteries placed in natural convection or forced-air high-temperature chambers, controlling the heating rate to a set test temperature and maintaining it for a specified duration. This tester ensures safe and reliable evaluation of battery thermal performance according to industry standards.
Related Products
The Battery Spray Combustion Tester is designed for lithium battery (or battery pack) flame resistance test. In an experimental platform to drill a diameter of 102mm holes, and in the holes placed on a wire mesh, the battery under test on the wire mesh screen, installed around the specimen in an octagonal aluminum wire mesh, and then ignite the burner, the specimen burst into heat until the battery explodes or the battery burned down, and the combustion process is timed.
Test standard
UL2272-2016，UL2271-2013，GB/T31241-2014，GB/T 18287 -2013
GB/T8897.4-2008，YD/T 2344.1-2011，GB/T 31485-2015
The RS-8000A2-50KN Battery Puncture and Compression Tester is designed for testing battery and power battery packs under puncture and compression conditions. It simulates potential risks like local thermal runaway or internal short circuits caused by compression or external puncture forces. During the test, real-time data on puncture force, stroke, battery surface temperature, and voltage changes are collected and synchronized.
The RS-6005 Explosion-proof Battery Testing Box is specifically designed to protect both operators and equipment during overcharge, over-discharge, and charge/discharge tests. By enclosing the battery inside the explosion-proof box and connecting it to an external charge/discharge tester, it ensures the safety of the testing process. The box can be customized according to specific testing requirements.
- High Precision and Speed: Equipped with a Panasonic AC servo motor, precision ball screw, and linear guide system for high-speed, high-precision positioning.
- Real-time Data Collection: Continuously collects puncture force, travel distance, surface temperature, and voltage with no steps and high resolution.
- Remote Control and Data Acquisition: Supports high-speed Ethernet remote control and data collection, effective over distances of up to 100m.
- Comprehensive Safety Testing: Simulates puncture/extrusion forces to assess battery safety, optimizing products based on real-time data.
- Complies with Industry Standards: Meets the safety and testing requirements outlined in GB/T 31485-2015 for electric vehicle power batteries.
Temperature Control Battery Short Circuit Tester RS-6003C-4 integrated a variety of battery short-circuit test standard requirements and design, according to the standard requirements of the short-circuit device must comply with the C resistance range ≤ 5mo, so as to obtain the maximum short-circuit current test requirements; In addition to the short-circuit device line design must be able to withstand the impact of high-current, so we chose to use the work of the sub-grade DC magnetic contactor and all-copper terminal and the C part of the copper plate current conduction, wide and thick copper board effectively improve the heat dissipation effect so that high-current short-circuit device safer, effectively reducing the loss of test equipment to ensure the accuracy of the test data. Wide and thick copper plate effectively improves the heat dissipation effect, making the high-current short-circuit device safer, effectively.
Test standard
GB/T31485, IEC, EN, UN38.3, UL2054, QC/T744-2006, QC/T743-2006 and other standards.
- Model: RS-8000A2
- Application: Designed for battery and battery module crush & puncture tests, simulating localized thermal runaway or internal short circuits.
- Real-time Data Collection: Monitors pressure, displacement, puncture force, surface temperature, and voltage curve.
- Customizable Testing: Adjustable compression and puncture speeds with various fixture options.
- Safety: Ensures operator safety and prevents damage to the testing environment during potential fire or explosion.
- Compliance: Meets global standards, including GB/T, UL, IEC, and UN38.3
The High and low temperature battery extrusion & needle testing machine RS-6006 GDW is designed for extrusion & acupuncture test of battery and battery module in high and low temperature environment. It has video monitoring function and can automatically save video and reproduce the test process.
The Double-layer high and low temperature explosion-proof test chamber ITM-DEP-288L is designed for high and low temperature testing of batteries, batteries, electronic products and other products, parts and various materials. The equipment can simulate the quality inspection and reliability testing of products, parts and materials under the condition of temperature change
